How To Clean An Aftermarket Air Filter

Revo Air intake system filters utilize multi-layered foam technology to trap grit and dirt while maintaining catamenia efficiency over time. Using foam increases the filter's area and is washable, compared to standard newspaper and cotton filters which trap dust on the surface, get less efficient the more they are used and need to be replaced. It's important that you clean and oil your filter in line with your service schedule to ensure optimum performance and lifetime of your filter.

What are the main benefits of Revo foam filters?

Designed to increase horsepower and rate of acceleration
Exceptional filtration
High airflow with three layers of cream
Lifetime warranty

Why choose a foam filter?

And then why exercise Revo employ foam? Compared to newspaper, cotton or other filter technologies, reticulated polyester foam achieves optimum performance against iii key criteria:

Maximum airflow: the ability to let air to pass through without causing a large drop in pressure.
Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air.
Dust load-up tolerance: the capability to blot a large amount of dust without reducing airflow chapters.

This type of filter has been used in all fields of motorsport from Formula one to the World Rally Title. The Revo filter range receives this same attending to detail at the pattern stage and is manufactured to the exact same standards.

All Revo air intake systems use foam filters. You can bank check out the whole range hither.

Why do I need to make clean my cream filter?

Unlike newspaper filters, Revo Pro-Panel Filters are a serviceable upgrade. You can clean your filter in line with your usual service schedule, or sooner if required to ensure peak performance. Cleaning your filter will ensure it lasts and performs every bit information technology should. You should never apply engine oil, cotton guaze filter oil or whatever other oil not specifically designed for foam air filters.

You should follow the instructions on any production you choose to purchase. Improper utilise of cleaning chemicals tin damage filter materials.

How to clean your Revo foam air filter.

Step 1: Removing the oil

The basic goal for this pace is to firstly intermission downwards the sticky dust memory oil on the filter and remove whatever other droppings using a cleaning amanuensis. Subsequently a few minutes you should wash the cleaning product from the filter using warm h2o. Yous should run warm water through the side of the filter likewise if possible to help remove whatsoever remaining dust.

Step ii: Drying the filter

Afterward the Pro-Panel filter has been cleaned, leave information technology to dry in a warm, dry out place until fully dry. Don't try to speed this up with an air gun or heat gun as you lot will likely damage the foam.

Step 3: Re-oiling the filter

When fully dry, re-oil following the instructions. Information technology must be a specific cream air filter oil. There is a common misconception that oil can contaminate the MAF unit (mass air menstruation meter). Foam filter oils are designed to be as well glutinous to become airborne and volition non cause consequence if re-practical correctly.

What cleaning kit should I buy?

Currently Revo practise not offering any service products for the Pro-Panel Filters. Hither are some items that we recommend you use.

ITG

CLK Cleaning Kit

Available individually or as a kit for low-cal and heavy dust retention. Cheque with your Revo Authorised Dealer for information on which is most suitable for your vehicle.

Pipercross

Droplets Cleaning Kit

The perfect solution for cleaning and prolonging the life of your filter, each kit contains everything required.